MAIN MENU

Before carrying out the Test, the software needs that the following plant data are loaded, precisely:

  • General data (carrying capacity, speed, rope, counterweight, etc....), listed in the relevant mask
  • Data relevant to the geometry of the ground (progressive distances and absolute values)
  • Data relevant to the geometry of the line: absolute values (height and progressive distance) and relative values (length and span difference in height)

Regarding the Italian Standards, it is possible to test the max. admitted loads on compression and support rollers

The "Line Calculus" command makes it possible to get the following printouts

Further, the power unit data are available along with the detailed report (Summary Report) on the calculations carried out.

Similarly to all the other program sections, there is the possibility to access the on line Help or return to the Main Menu.
From the Main Menu it is possible to return to the Home Page, then, to exit from the procedure!